Deutsch Gray J1939 Female to OBD II SAE J1962 Female Automotive Cable

• Type: Insulated
• Conductor Type: Stranded
• Application: Overhead
• Conductor Material: Copper
• Sheath Material: PVC
• Insulation Material: XLPE
• Model NO.: J1939 Male gray
• Material Shape: Flat Wire
• Range of Application: LSOH
• Certification: ISO9001, CE, UL, CCC, RoHS, VDE
• Brand: Edgarcn
• Transport Package: Box
• Specification: 40*30*23
• Trademark: Edgarcn
• Origin: China
• HS Code: 8544422900
• Production Capacity: 1000000 PCS Per Month

Product Description

Deutsch Gray J1939 Female  to OBD II SAE J1962 Female automotive cable


 

SAE standards documents on OBD-II

• J1708 - Defines a standard used for serial communications between ECUs on a heavy duty vehicle and also between a computer and the vehicle.
• J1850 - Defines a serial data protocol. There are two variants- 10.4 kbit/s (single wire, VPW) and 41.6 kbit/s (two wire, PWM). Mainly used by US manufacturers, also known as PCI (Chrysler, 10.4 kbit/s), Class 2 (GM, 10.4 kbit/s), and SCP (Ford, 41.6 kbit/s)
• J1939 - Defines a data protocol for heavy duty commercial vehicles
• J1962 - Defines the physical connector used for the OBD-II interface.
• J1978 - Defines minimal operating standards for OBD-II scan tools
• J1979 - Defines standards for diagnostic test modes
• J2012 - Defines standards trouble codes and definitions.
• J2178-1 - Defines standards for network message header formats and physical address assignments
• J2178-2 - Gives data parameter definitions
• J2178-3 - Defines standards for network message frame IDs for single byte headers
• J2178-4 - Defines standards for network messages with three byte headers*
• J2284-3 - Defines 500 kbit/s CAN Physical and Data link layer
• J2411 - Describes the GMLAN (single-wire CAN) protocol, used in newer GM vehicles. Often accessible on the OBD connector as PIN 1 on newer GM vehicles.

J1962 connector:

The SAE J1962 specification provides for two standardized hardware interfaces, called type A and type B. Both are female, 16-pin (2x8), D-shaped connectors, and both have a groove between the two rows of pins, but type B's groove is interrupted in the middle. This prevents the insertion of a type A male plug into a type B female socket while allowing a type B male plug to be inserted into a type A female socket.

The type A connector is used for vehicles that use 12V supply voltage, whereas type B is used for 24V vehicles and it is required to mark the front of the D-shaped area in blue color.

Pin Number	Description
1	Manufacturer Discretionary
2	SAE J1850 Bus + (VPW / PWM)
3	Manufacturer Discretionary
4	Chassis Ground
5	Signal Ground
6	CAN High (ISO 15765-4 and SAE J2284)
7	ISO 9141-2 / ISO 14230-4 K Line
8	Manufacturer Discretionary
9	Manufacturer Discretionary
10	SAE J1850 Bus - (PWM-only)
11	Manufacturer Discretionary
12	Manufacturer Discretionary
13	Manufacturer Discretionary
14	CAN Low (ISO 15765-4 and SAE J2284)
15	ISO 9141-2 / ISO 14230-4 L Line (Optional)
16	Vehicle Battery Power: Type "A" 12V/4A Type "B" 24V/2A

Material: PA66, tined plated compliant ROHS,

Working temperature: -20~80°C

Over-molding: customized 

Pitch: 4mm

Voltage: 12V for car and 24V for heavy vehicle
 

DEUTSCH HD10 series connector 

The HD series is an environmentally silicone rubber sealed, thermoplastic cylindrical connector, which is designed to be a faster, easier, trouble free assembly diagnostic connector in heavy-duty industry like truck, bus, cross-country vehicle,crane and forklift etc. When mated, the contacts are protected from water, dust, lubricating oils, fuel, road salt, grease, mud and other contaminants encountered.

• Operating at temperatures -40ºC to +125ºC, no Cracking, Chipping or leaking after 20 test cycles from -40ºC~+125ºC.

• No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G's at 10 to 2000Hz in each of the three mulually perpendicular planes for 2 hours. Force testing report as below shows

• IP68 rating, waterproof withstand immersion under 1.2 meter of water for 24 hours.

 

Cavity	Overall Length A	Overall Height ØB	Overall Length C	Overall Height ØD
3	1.609 (40.87)	1.069 (27.15)	1.639 (41.63)	.851 (21.62)
4	1.639 (41.63)	1.595 (40.51)	1.639 (41.63)	1.281 (32.54)
5	1.609 (40.87)	1.218 (30.94)	1.639 (41.63)	1.001 (25.43)
6	1.619 (41.12)	1.453 (36.91)	1.639 (41.63)	1.141 (28.98)
9	1.609 (40.87)	1.593 (40.47)	1.639 (41.63)	1.281 (32.54)

HD10 series
 

Position	Contact Size	Rear Threads	Plug	Receptacle Inline	Receptacle Flange
3	16	no	HD16-3-16S	HD14-3-16P	-
		yes	HD16-3-96S	HD14-3-96P	HD10-3-96P
4	4/16	yes	HD16-4-4S	-	HD10-4-4P
5	16	no	HD16-5-16S	HD14-5-16P	HD10-5-16P
6	16	yes	HD16-6-96S	HD14-6-96P	HD10-6-96P
6	12	yes	HD16-6-12S-B010	HD14-6-12P	HD10-6-12P
9	16	no	HD16-9-16S	HD14-9-16P	HD10-9-16P
		yes	HD16-9-96S	HD14-9-96P	HD10-9-96P
9 (J1939)	16	yes	HD16-9-1939S	HD14-9-1939P	HD10-9-1939P

COMPANY PROFILE
 

☆ Privately held company, established in 1999

☆ Sales volume over 16 Million USD since 2017 

☆ OEM & ODM company, with employees more than 250 persons, 7260 square-meters in size 

☆ Service for economical solutions and innovative wire harnesses design & manufacturing 

☆IATF16949 (2016) & ISO 9001 (2015), and UL certified supplier with wiring No. E468011 & cable No. E479323
 

 

 

CERTIFICATION




Q&A   
 

1. Q: Can you help to design?
A: Yes, we are an ODM / OEM company, beyond we have been specializing in wire harness & Cable assembly since 1999.
2. Q: When will you start to help design?
A: We sketch simple solution for initial discussion, after quotation and order placed then start to drawing and double confirm with client for the design. 
3. Q: What if quality issues occur when customer discover?
A: Our quality and engineer team will positively respond for the quality issues with 72 hours, as we are intend to make long-stand strategy with customer and the value is to provide better service.
4. Q: Do you have any standard products to cut down customers lead time for prototype and tooling cost?
A: Yes, there are over 1000 sets of molds and some of them can be used for customer directly. Moreover, Edgar is specialized in wire harness over 20
years with  5000+  products

CONTACT US