Guangdong, China
Business Type:
Manufacturer/Factory & Trading Company
Number of Employees:
Year of Establishment:
Management System Certification:
ISO9001:2015, IATF16949
OEM/ODM Availability:
OEM/ODM Service
Sample Available

Deutsch HD10 Series J1939, OBD II J1962, Diagnostic Connector Cable manufacturer / supplier in China, offering OBD II J1962 to HD10 Series J1939 Waterproof Connector Cable Assemby, Molex 4.2 mm 4pin 8pin Overmold Cable, Te Circular Power Connectors to Aviation Connector Cable for Electrical Machinery and so on.

Diamond Member Since 2018
Audited Supplier

OBD II J1962 to HD10 Series J1939 Waterproof Connector Cable Assemby

Purchase Qty. / Reference FOB Price
5,000-9,999 Pieces US $100
10,000+ Pieces US $99
Port: Hong Kong, Hong Kong
Production Capacity: 1000000 PCS Per Month
Payment Terms: L/C, T/T, D/P, Western Union, Paypal, Money Gram
Type: Insulated
Conductor Type: Stranded
Application: Overhead
Conductor Material: Copper
Sheath Material: PVC
Insulation Material: XLPE

You Might Also Like


Basic Info.

Model NO.
OBD 19862
Material Shape
Flat Wire
Range of Application
Transport Package
HS Code

OBD II J1962 to HD10 series J1939 Waterproof Connector HD16-9-1939S Cable Assemby

OBD II J1962 to HD10 Series J1939 Waterproof Connector Cable Assemby
OBD II J1962 to HD10 Series J1939 Waterproof Connector Cable Assemby

Deutsch J1708 Gray to OBD II J1962  Customized automotive cable assembly 

1.voltage :dc 300v 5m ohm/10 ms resistance:3.0 ohm MAX
3.100% open ,Short ,Mis-Wirs Testing

SAE standards documents on OBD-II

  • J1708 - Defines a standard used for serial communications between ECUs on a heavy duty vehicle and also between a computer and the vehicle.
  • J1850 - Defines a serial data protocol. There are two variants- 10.4 kbit/s (single wire, VPW) and 41.6 kbit/s (two wire, PWM). Mainly used by US manufacturers, also known as PCI (Chrysler, 10.4 kbit/s), Class 2 (GM, 10.4 kbit/s), and SCP (Ford, 41.6 kbit/s)
  • J1939 - Defines a data protocol for heavy duty commercial vehicles
  • J1962 - Defines the physical connector used for the OBD-II interface.
  • J1978 - Defines minimal operating standards for OBD-II scan tools
  • J1979 - Defines standards for diagnostic test modes
  • J2012 - Defines standards trouble codes and definitions.
  • J2178-1 - Defines standards for network message header formats and physical address assignments
  • J2178-2 - Gives data parameter definitions
  • J2178-3 - Defines standards for network message frame IDs for single byte headers
  • J2178-4 - Defines standards for network messages with three byte headers*
  • J2284-3 - Defines 500 kbit/s CAN Physical and Data link layer
  • J2411 - Describes the GMLAN (single-wire CAN) protocol, used in newer GM vehicles. Often accessible on the OBD connector as PIN 1 on newer GM vehicles.

J1962 connector:

The SAE J1962 specification provides for two standardized hardware interfaces, called type A and type B. Both are female, 16-pin (2x8), D-shaped connectors, and both have a groove between the two rows of pins, but type B's groove is interrupted in the middle. This prevents the insertion of a type A male plug into a type B female socket while allowing a type B male plug to be inserted into a type A female socket.

The type A connector is used for vehicles that use 12V supply voltage, whereas type B is used for 24V vehicles and it is required to mark the front of the D-shaped area in blue color.

OBD II J1962 to HD10 Series J1939 Waterproof Connector Cable Assemby

Pin NumberDescription
1Manufacturer Discretionary
2SAE J1850 Bus + (VPW / PWM)
3Manufacturer Discretionary
4Chassis Ground
5Signal Ground
6CAN High (ISO 15765-4 and SAE J2284)
7ISO 9141-2 / ISO 14230-4 K Line
8Manufacturer Discretionary
9Manufacturer Discretionary
10SAE J1850 Bus - (PWM-only)
11Manufacturer Discretionary
12Manufacturer Discretionary
13Manufacturer Discretionary
14CAN Low (ISO 15765-4 and SAE J2284)
15ISO 9141-2 / ISO 14230-4 L Line (Optional)
16Vehicle Battery Power:
  • Type "A" 12V/4A
  • Type "B" 24V/2A

Material: PA66, tinned plated compliant ROHS,

Working temperature: -20~80°C

Over-molding: customized 

Pitch: 4mm

Voltage: 12V for car and 24V for heavy vehicle

DEUTSCH HD10 series connector 

The HD series is an environmentally silicone rubber sealed, thermoplastic cylindrical connector, which is designed to be a faster, easier, trouble free assembly diagnostic connector in heavy-duty industry like truck, bus, cross-country vehicle,crane and forklift etc. When mated, the contacts are protected from water, dust, lubricating oils, fuel, road salt, grease, mud and other contaminants encountered.

  • Operating at temperatures -40ºC to +125ºC, no Cracking, Chipping or leaking after 20 test cycles from -40ºC~+125ºC.

  • No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G's at 10 to 2000Hz in each of the three mulually perpendicular planes for 2 hours. Force testing report as below shows

  • IP68 rating, waterproof withstand immersion under 1.2 meter of water for 24 hours.

OBD II J1962 to HD10 Series J1939 Waterproof Connector Cable Assemby
Cavity Overall Length
Overall Height
Overall Length
Overall Height
31.609 (40.87) 1.069 (27.15) 1.639 (41.63) .851 (21.62)
41.639 (41.63) 1.595 (40.51) 1.639 (41.63) 1.281 (32.54)
51.609 (40.87) 1.218 (30.94) 1.639 (41.63) 1.001 (25.43)
61.619 (41.12) 1.453 (36.91) 1.639 (41.63) 1.141 (28.98)
91.609 (40.87) 1.593 (40.47) 1.639 (41.63) 1.281 (32.54)

OBD II J1962 to HD10 Series J1939 Waterproof Connector Cable Assemby

HD10 series

no HD16-3-16S HD14-3-16P -
yes HD16-3-96S HD14-3-96P HD10-3-96P
44/16yes HD16-4-4S HD10-4-4P
516no HD16-5-16S HD14-5-16P HD10-5-16P
616yes HD16-6-96S HD14-6-96P HD10-6-96P
612yes HD16-6-12S-B010 HD14-6-12P HD10-6-12P
no HD16-9-16S HD14-9-16P HD10-9-16P
yes HD16-9-96S HD14-9-96P HD10-9-96P
9 (J1939) 16yes HD16-9-1939S HD14-9-1939P HD10-9-1939P


OBD II J1962 to HD10 Series J1939 Waterproof Connector Cable Assemby
 Privately held company, established in 1999
 Sales volume over 16 Million USD since 2017 
 OEM & ODM company, with employees more than 250 persons, 7260 square-meters in size 
 Service for economical solutions and innovative wire harnesses design & manufacturing 
☆IATF16949 (2016) & ISO 9001 (2015), and UL certified supplier with wiring No. E468011 & cable No. E479323

OBD II J1962 to HD10 Series J1939 Waterproof Connector Cable Assemby


OBD II J1962 to HD10 Series J1939 Waterproof Connector Cable Assemby


1. Q: Can you help to design?
A: Yes, we are an ODM / OEM company, beyond we have been specializing in wire harness & Cable assembly since 1999.
2. Q: When will you start to help design?
A: We sketch simple solution for initial discussion, after quotation and order placed then start to drawing and double confirm with client for the design. 
3. Q: What if quality issues occur when customer discover?
A: Our quality and engineer team will positively respond for the quality issues with 72 hours, as we are intend to make long-stand strategy with customer and the value is to provide better service.
4. Q: Do you have any standard products to cut down customers lead time for prototype and tooling cost?
A: Yes, there are over 1000 sets of molds and some of them can be used for customer directly. Moreover, Edgar is specialized in wire harness over 20
years with  5000+  products


Send your message to this supplier

avatar Mr. John Huang

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now