• SAE J1962 OBD II Automotive Diagnostic Cable Assembly
  • SAE J1962 OBD II Automotive Diagnostic Cable Assembly
  • SAE J1962 OBD II Automotive Diagnostic Cable Assembly
  • SAE J1962 OBD II Automotive Diagnostic Cable Assembly
  • SAE J1962 OBD II Automotive Diagnostic Cable Assembly
  • SAE J1962 OBD II Automotive Diagnostic Cable Assembly

SAE J1962 OBD II Automotive Diagnostic Cable Assembly

Transport Package: Box
Specification: 40*30*23
Trademark: Edgarcn
Origin: China
Customization:

Contact Supplier

360° Virtual Tour

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
SAE J1962 OBD II
HS Code
8544422900
Production Capacity
1000000 PCS Per Month

Product Description

SAE J1962 OBD II automotive diagnostic cable assembly 


SAE J1962 OBD II Automotive Diagnostic Cable Assembly 1.voltage :dc 300v 5m ohm/10 ms
2.contact resistance:3.0 ohm MAX
3.100% open ,Short ,Mis-Wirs Testing

SAE standards documents on OBD-II

  • J1708 - Defines a standard used for serial communications between ECUs on a heavy duty vehicle and also between a computer and the vehicle.
  • J1850 - Defines a serial data protocol. There are two variants- 10.4 kbit/s (single wire, VPW) and 41.6 kbit/s (two wire, PWM). Mainly used by US manufacturers, also known as PCI (Chrysler, 10.4 kbit/s), Class 2 (GM, 10.4 kbit/s), and SCP (Ford, 41.6 kbit/s)
  • J1939 - Defines a data protocol for heavy duty commercial vehicles
  • J1962 - Defines the physical connector used for the OBD-II interface.
  • J1978 - Defines minimal operating standards for OBD-II scan tools
  • J1979 - Defines standards for diagnostic test modes
  • J2012 - Defines standards trouble codes and definitions.
  • J2178-1 - Defines standards for network message header formats and physical address assignments
  • J2178-2 - Gives data parameter definitions
  • J2178-3 - Defines standards for network message frame IDs for single byte headers
  • J2178-4 - Defines standards for network messages with three byte headers*
  • J2284-3 - Defines 500 kbit/s CAN Physical and Data link layer
  • J2411 - Describes the GMLAN (single-wire CAN) protocol, used in newer GM vehicles. Often accessible on the OBD connector as PIN 1 on newer GM vehicles.

J1962 connector:

The SAE J1962 specification provides for two standardized hardware interfaces, called type A and type B. Both are female, 16-pin (2x8), D-shaped connectors, and both have a groove between the two rows of pins, but type B's groove is interrupted in the middle. This prevents the insertion of a type A male plug into a type B female socket while allowing a type B male plug to be inserted into a type A female socket.

The type A connector is used for vehicles that use 12V supply voltage, whereas type B is used for 24V vehicles and it is required to mark the front of the D-shaped area in blue color.

SAE J1962 OBD II Automotive Diagnostic Cable Assembly

Pin Number Description
1 Manufacturer Discretionary
2 SAE J1850 Bus + (VPW / PWM)
3 Manufacturer Discretionary
4 Chassis Ground
5 Signal Ground
6 CAN High (ISO 15765-4 and SAE J2284)
7 ISO 9141-2 / ISO 14230-4 K Line
8 Manufacturer Discretionary
9 Manufacturer Discretionary
10 SAE J1850 Bus - (PWM-only)
11 Manufacturer Discretionary
12 Manufacturer Discretionary
13 Manufacturer Discretionary
14 CAN Low (ISO 15765-4 and SAE J2284)
15 ISO 9141-2 / ISO 14230-4 L Line (Optional)
16 Vehicle Battery Power:
  • Type "A" 12V/4A
  • Type "B" 24V/2A


Material: PA66, tined plated compliant ROHS,

Working temperature: -20~80°C

Over-molding: customized 

Pitch: 4mm

Voltage: 12V for car and 24V for heavy vehicle
 

COMPANY PROFILE
 

SAE J1962 OBD II Automotive Diagnostic Cable Assembly
 Privately held company, established in 1999
 Sales volume over 16 Million USD since 2017 
 OEM & ODM company, with employees more than 250 persons, 7260 square-meters in size 
 Service for economical solutions and innovative wire harnesses design & manufacturing 
IATF16949 (2016) & ISO 9001 (2015), and UL certified supplier with wiring No. E468011 & cable No. E479323
 
 
 
SAE J1962 OBD II Automotive Diagnostic Cable Assembly


CERTIFICATION


SAE J1962 OBD II Automotive Diagnostic Cable Assembly

Q&A   

 
1. Q: Can you help to design?
A: Yes, we are an ODM / OEM company, beyond we have been specializing in wire harness & Cable assembly since 1999.
2. Q: When will you start to help design?
A: We sketch simple solution for initial discussion, after quotation and order placed then start to drawing and double confirm with client for the design. 
3. Q: What if quality issues occur when customer discover?
A: Our quality and engineer team will positively respond for the quality issues with 72 hours, as we are intend to make long-stand strategy with customer and the value is to provide better service.
4. Q: Do you have any standard products to cut down customers lead time for prototype and tooling cost?
A: Yes, there are over 1000 sets of molds and some of them can be used for customer directly. Moreover, Edgar is specialized in wire harness over 20
years with  5000+  products


CONTACT US

Send your message to this supplier

*From:
*To:
avatar Mr. John Huang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

360° Virtual Tour

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company
Number of Employees
261
Year of Establishment
2011-03-24