Description
Standard LEDs - Through Hole 470 nm
OPTEK OVLLB8C7 blue
OPTEK OVLLG8C7 green
OPTEK OVLLR8C7 red
OPTEK OVLLY8C7 yellow
OPTEK TECHNOLOGY (OVLLB8C7) 5MM CYLINDER INGAN blue
OPTEK TECHNOLOGY (OVLLG8C7) 5MM CYLINDER INGAN green
OPTEK TECHNOLOGY (OVLLR8C7) 5MM CYLINDER INGAN red
OPTEK TECHNOLOGY (OVLLY8C7) 5MM CYLINDER INGAN yellow
TT Electronics / Optek Technology OVLLB8C7 LEDs blue
TT Electronics / Optek Technology OVLLG8C7 LEDs green
TT Electronics / Optek Technology OVLLR8C7 LEDs red
TT Electronics / Optek Technology OVLLY8C7 LEDs yellow
Mfr. #:OVLLB8C7
Mfr.:Optek / TT Electronics
Description: Standard LEDs - Through Hole Blue 470 nm
RGB LED Strip (5050 SMD, 60/M)
16.5 foot roll of 5050 RGB SMD LED's, with 60 LED's per meter, for a total of 300 LED's. Requires an RGB controller and 12v power supply. This is the same type of RGB LED strip used on the Raw Thrills / Betson games such as Jurassic Park and Aliens Armageddon.
- RGB LED Strip
- 12V/72W (each LED is 0.24W)
- Connectors at double end
- 60 LEDs in each meter
- This version is water proof by glue covered
- All the standard length (1/3/5 Meters) are pre-sold with power connector, which can connect to the special power adapter and controller for this product.
- If you need a special length like 2 meters, feel free to DIY it, just combine two 1-meters.
- You will need a power supply and remote controller for this product, and the power supply require 12V DC power, please be aware of this.
- Four Pins interface: White - VCC, the rest cable color is responding and to GND.
COMPANY PROFILE
☆ Privately held company, established in 1999
☆ Sales volume over 16 Million USD since 2017
☆ OEM & ODM company, with employees more than 250 persons, 7260 square-meters in size
☆ Service for economical solutions and innovative wire harnesses design & manufacturing
☆IATF16949 (2016) & ISO 9001 (2015), and UL certified supplier with wiring No. E468011 & cable No. E479323
CERTIFICATION
Q&A
1. Q: Can you help to design?
A: Yes, we are an ODM / OEM company, beyond we have been specializing in wire harness & Cable assembly since 1999.
2. Q: When will you start to help design?
A: We sketch simple solution for initial discussion, after quotation and order placed then start to drawing and double confirm with client for the design.
3. Q: What if quality issues occur when customer discover?
A: Our quality and engineer team will positively respond for the quality issues with 72 hours, as we are intend to make long-stand strategy with customer and the value is to provide better service.
4. Q: Do you have any standard products to cut down customers lead time for prototype and tooling cost?
A: Yes, there are over 1000 sets of molds and some of them can be used for customer directly. Moreover, Edgar is specialized in wire harness over 20
years with 5000+ products
CONTACT US
){kind=link}
){kind=link}