Heavy-Duty Overmolded Cable Assembly for Motor Controller Power Supply

Product Description

Molex Mini-Fit Connector Overmold Cable Assembly for Motor Controller Power Cable

Looking for a reliable power cable solution for motor control applications? EdgarWireHarness provides custom overmolded cable assemblies using Molex Mini-Fit Jr. connectors, designed specifically for motor controller power delivery in industrial and automotive environments.

Specification	Details
Connector Type	Molex Mini-Fit Jr. (Available in 2 to 20 circuits)
Current Rating	Up to 13A per circuit
Cable Options	PVC / TPE / Silicone jackets available
Overmold Material	Soft PVC, TPE, or Nylon for durable strain relief
Voltage Rating	300V AC/DC
Temperature Range	-20°C to 105°C
Application	Motor control units, servo drive systems, industrial automation, AGVs, robotics

We provide complete ODM/OEM support with 2D drawings and 3D models for quick prototyping and verification.

• Custom lengths, colors, and labeling available
• All assemblies tested for continuity, insulation, and durability
• Shipping worldwide with competitive lead times

Contact EdgarWireHarness for tailored solutions in power cable harnesses for motor controllers.

Keywords: #MolexMiniFit #OvermoldCableAssembly #MotorControllerCable #CustomPowerCable #MiniFitJr #EdgarWireHarness #ODMConnectorSolutions #AutomationCableHarness #IndustrialPowerCable #B2BConnectorSupplier

Molex mini fit 4.2 pitch cable for Motherboard



 

Mini-Fit Jr. and Mini-Fit Plus power Connectors deliver up to 9.0A and 13.0A respectively, offer a 4.2.00mm pitch while blind-mating, terminal position assurance and back-shell options offer a versatile connector system for a wide range of applications.A wide range of OEMs require high-current, high-density power connectors that also support design flexibility. To meet these needs, Mini-Fit Jr., Mini-Fit Plus, Mini-Fit BMI and Mini-Fit TPA2 Connectors offer polarized housings with isolated terminals, positive locks and low-engagement forces. All versions of Mini-Fit Jr. and Mini-Fit Plus Connectors are compatible with each other, including with Mini-Fit TPA2 and Mini-Fit BMI Components, bringing flexibility to the toughest design dilemmas.
 

Mini-Fit BMI Connectors	Allow misalignment and provide up to 2.54mm of float between mating surfaces for easy blind-mate connections. Furthermore, they feature flanges that help "gather" the mating receptacle for more accurate mating.
Mini-Fit TPA2 Connectors	Prevent end-product failure by offering terminal position assurance (TPA), which reduces terminal back-out by providing locking redundancy. Mini-Fit TPA2 Receptacles are backward compatible with Mini-Fit Jr. Headers, eliminating the need for customers to make major revisions or investments in their applications.

Micro-Fit 3.0 Connector Systems, available in multiple circuit sizes and cable lengths for power applications, offer a 3.00mm pitch, an 8.5A maximum current rating and many design options such as a terminal position assurance, blind-mating and compliant pin features
 

Micro-Fit 3.0 BMI Connectors	Designed for blind-mating applications. They allow mating misalignment (per product drawing). In hard-to-reach applications, such as drawers or fan assembly trays, connectors need to be mated and unmated without being seen. Doing so can cause damage to the connector and/or terminal and consume valuable labor time.
Micro-Fit TPA Connector	Helps prevent failure in end products by offering terminal position assurance (TPA). The TPA reduces terminal back-out by providing locking redundancy, assemblers cannot insert the TPA unless terminal is properly inserted.
Micro-Fit 3.0 CPI Connectors	Drovide a compliant pin interface while maintaining all the features of the standard Micro-Fit 3.0 Connector. The robust eye-of-the-needle design provides a reliable interface when recommended board layouts are followed. The Micro-Fit 3.0 CPI Header mates with Micro-Fit 3.0 Receptacle, allowing running changes as boards transition from solder to press-fit applications. For lower applied costs, OEMs often prefer a compliant pin connector over one that requires soldering.
Micro-Fit 3.0 RMF Terminals	Designed for applications needing lower engagement and disengagement forces or when the units are cycled frequently. The pre-lubricated version can be mated up to 250 times and fit into standard Micro-Fit 3.0 Housings. Applications often require rugged terminals and lower mating force to reduce operator fatigue during assembly and/or to withstand high-mating cycles.

Communication data cable series



COMPANY PROFILE
 

☆ Privately held company, established in 1999

☆ Sales volume over 16 Million USD since 2017 

☆ OEM & ODM company, with employees more than 250 persons, 7260 square-meters in size 

☆ Service for economical solutions and innovative wire harnesses design & manufacturing 

☆IATF16949 (2016) & ISO 9001 (2015), and UL certified supplier with wiring No. E468011 & cable No. E479323
 

CERTIFICATION




Q&A   
 

1. Q: Can you help to design?
A: Yes, we are an ODM / OEM company, beyond we have been specializing in wire harness & Cable assembly since 1999.
2. Q: When will you start to help design?
A: We sketch simple solution for initial discussion, after quotation and order placed then start to drawing and double confirm with client for the design. 
3. Q: What if quality issues occur when customer discover?
A: Our quality and engineer team will positively respond for the quality issues with 72 hours, as we are intend to make long-stand strategy with customer and the value is to provide better service.
4. Q: Do you have any standard products to cut down customers lead time for prototype and tooling cost?
A: Yes, there are over 1000 sets of molds and some of them can be used for customer directly. Moreover, Edgar is specialized in wire harness over 20 years with  5000+  products.

CONTACT US